偏摆检查仪用于检测轴类、盘类零件的径向、圆跳动和端面圆跳动，产品设计新颖，美观大方，精度高操作极为方便，是检测工作常用的器材。泊头市达昌机械装备制造有限公司位于渤海之滨”铸造之乡”的泊头市，北依首都北京及传统的工商业名城天津，交通十分便利, 公司主要生产的产品有：铸铁检验平板、划线平台、划线平板、焊接平板、T型槽装配平台、镗铣机工作台、三座标平台、铸铁平台、电机试验平台、火工平台、落地镗床工作台、镁铝轻型平尺、铸铁平型平尺、桥型平尺、方尺、直角尺、机床专用角度尺、检验方箱、划线方箱、磁性方箱、磁性V型架、偏摆检查仪、齿轮跳动检查仪、机床检验棒、机床调整垫铁、机床防震垫铁、阶梯垫铁、等高垫铁、铸铁Ｖ型铁、钢件v型架、铸铁弯板、正弦规、大理石平板、轴用卡板或止口卡板、校对光滑专用环规、光滑极限孔用量规、划线盘、圆柱角尺等。产品各项技术指标均达到或超过国家鉴定规程要求。
偏摆检查仪的保养与使用：偏摆检查仪的齿条运行操作上下、前后、左右调节平稳自如，操作方便，表架坚固，提高了检测仪器的灵敏性。Deflection of the maintenance and use of tester: Partial pendulum tester rack run operation from top to bottom, front and rear, left freely adjust a smooth, easy to operate, the table sturdy frame to improve the sensitivity of detection equipment. 偏摆仪是精密的检测仪器，操作者必须熟练掌握仪器的操作技能，精心地维护保养，并指定专人维护使用；偏摆仪必须始终保持设备完好，设备安装应平衡可靠，导轨面要光滑Partial pendulum instrument is precision testing instruments, the operator must be familiar with equipment operating skills, maintenance carefully and assign someone to maintain use; deflection instrument must always remain intact equipment, equipment installation should be a balanced and reliable guide to a smooth surface ，无磕碰伤痕，二顶尖同轴度允差应在L=400MM范围内a向及b向均小于0.02MM；工件检测前应先用L=400MM检验棒和百分表对偏摆仪进行, no bump wounds, two top concentricity tolerance should be L = 400MM, within a forward and b to less than 0.02MM; workpiece detection tests should be preceded by L = 400MM bar and dial indicator on the instrument for deflection 精度校验，在确保合格后，方可使用。accuracy of calibration, to ensure compliance before they are allowed to use.达昌量具本着“以质量求发展、以信誉求生存”的经营方式。形成了生产销售维修一条龙的体系，凡是购买我公司产品的客户，如果在半年之内出现质量问题，实行产品“三包”！坚决以为客户服务为中心！
更多产品请查询：http://www.btdclj.cn