天然乳胶
简介：天然乳胶又称阿摩尼亚白胶、亚摩尼亚胶、亚么尼亚胶、白胶，具有良好的成膜性能，湿凝胶强力高，力学性能良好，非橡胶成分含量少机械稳定性高（一般不低于550S—600S），颜色洁白，泡沫稳定性好。
性能：天然乳胶具有良好的成膜性能，湿凝胶强力高，力学性能良好，非橡胶成分含量少机械稳定性高（一般不低于550S—600S），颜色洁白，泡沫稳定性好。
技术参数：固体成分含量：61%±0.5
乳胶各项技术指标，平均总固形物61.5%，干胶含量60.2%，总固形物与干胶差1.3%，氨含量0.72%，挥发脂肪酸值0.04%，机械稳定性650秒，乳白色。
储存方式：气温在20℃以下，存放于室内外较通风处；气温在20℃以上，应存放于阴凉的室内；不准存放在室外以及能直接受到阳光的暴晒的地方。
保质期限：气温在20℃以下180天（需密封）；气温20℃以上，为60天（需密封）。如果已经打开封盖，应在30天内用完，否则胶质会产生变化
用途：广泛适用于乳胶发泡，鞋厂拉帮成型，（贴合厂）复合厂/夹布厂滚桐上胶，手袋厂，箱包厂，折边铆边厂，纸盒厂，抗辐制品厂，导电涂层手套制品，工艺品厂提供抗张粘弹性（橡胶）使用，用于《喷胶》椰棕椰艺花篮椰棕床垫的粘合（毛，棕，动植物及人工合成纤维，人造皮革）的粘合、植绒，粘合皮/革/棉麻布料/海绵/EVA切片，床垫、枕头、抱枕、腰枕、坐垫、汽车头枕，发泡鞋业,海绵,气球,避孕套,手套,浸渍制品,贴合,毛(棕)纤维,植绒,造纸,不织布,铸模制品,模具等。
包装：铁桶包装 毛重221KGS净重205KGS
L A T E X T E S T R E P O R T
天 然 胶 乳 检 测 报 告
Subject : The quality test report of natural rubber latex 60% DRC H.A.
标题 ： 高氨浓缩天然乳胶质量检测报告
Items
项目 Test result
实测结果 International standard
国际标准
Total solid content总固含量 61.53 61.5 min
Dry Rubber Content干胶含量 60.19 60 min
Non rubber solid非橡胶固体含量 1.49 2.0 max
Ammonia content (on total weight)氨含量 0.74 0.6 min
Ammonia content (on water PH.)水溶氨含量 1.92 3.0 max
PH of latex酸碱值 10.58 11.0 max
KOH number氢氧化钾含量 0.48 1.0 max
V. F. A. 挥发脂肪酸值 0.014 0.03max
Mechanical Stablity Time（S） 机械稳定率（秒） 860 650 min
Magnesium Content (on solids),PPM镁含量 32.5 80 PPM
Color of latex乳胶颜色 White白 White 白
All tests are performed according to the relevant I.S.O. 2004 – 1979 (E) Specification
Tested by SGS International Inspecting Co., Ltd. Bangkok branch
由SGS国际商检机构曼谷分公司检验
天 然 胶 乳 检 测 报 告
Subject : The quality test report of natural rubber latex 60% DRC H.A.
标题 ： 高氨浓缩天然乳胶质量检测报告
Items
项目 Test result
实测结果 International standard
国际标准
Total solid content总固含量 61.53 61.5 min
Dry Rubber Content干胶含量 60.19 60 min
Non rubber solid非橡胶固体含量 1.49 2.0 max
Ammonia content (on total weight)氨含量 0.74 0.6 min
Ammonia content (on water PH.)水溶氨含量 1.92 3.0 max
PH of latex酸碱值 10.58 11.0 max
KOH number氢氧化钾含量 0.48 1.0 max
V. F. A. 挥发脂肪酸值 0.014 0.03max
Mechanical Stablity Time（S） 机械稳定率（秒） 860 650 min
Magnesium Content (on solids),PPM镁含量 32.5 80 PPM
Color of latex乳胶颜色 White白 White 白
All tests are performed according to the relevant I.S.O. 2004 – 1979 (E) Specification
Tested by SGS International Inspecting Co., Ltd. Bangkok branch
由SGS国际商检机构曼谷分公司检验
Latex
Descript ion: Natural latex white plastic, also known as ammonia, ammonia glue, what sub-Virginia glue, white glue, with good film-forming properties, high wet gel strength, good mechanical properties, less non-rubber ingredients mechanical stability (no less than 550S-600S), color white, foam stability.
Performance: Natural latex has good film forming properties, high wet gel strength, good mechanical properties, non-rubber component content of less mechanical stability (no less than 550S-600S), color white, foam stability.
Technical parameters: solids content: 61% ± 0.5
Latex various technical indicators, average 61.5% total solids, dry rubber content of 60.2%, with a total difference of 1.3% adhesive solids and ammonia content of 0.72%, 0.04% volatile fatty acid value and mechanical stability of the 650 seconds, milky white.
Storage: temperature below 20 ℃, indoor and outdoor storage in a more ventilated place; temperature above 20 ℃, should be stored in a cool room; not allowed to be stored outdoors and sun exposure can be directly affected by the place.
Shelf life: temperature below 20 ℃ for 180 days (it should be sealed); temperature above 20 ℃ for 60 days (it should be sealed). If the cover has been opened, should be used within 30 days, otherwise will produce changes in glial
Uses: widely used in latex foam, shoe factory to help pull molding, (factory fit) composite plant / fabric glue factory roll Tong, handbag, bag factory, folding side rivet factory, paper factory, anti-radiation products factory, the conductive coating glove products, handicraft factory to provide tensile viscoelastic (rubber) used for "glue" coconut palm coconut palm coconut basket mattress Arts adhesion (hair, brown, animal and synthetic fiber , artificial leather) adhesive, flocking, bonding leather / leather / cotton fabric / foam / EVA slice, mattresses, pillows, pillow, lumbar pillow, cushion, car headrest, foam shoes, sponge, balloon , condoms, gloves, impregnated products, fit, hair (brown) fibers, flocking, paper, non-woven, molded products, mold and so on.
Packing: iron drum net weight 205KGS GW 221KGS
L A T E X T E S T R E P O R T
Natural gum milk detection report
Subject: The quality test report of natural rubber latex 60% DRC HA
Title: High ammonia concentrated natural latex quality inspection report
Items
Project Test result
International standard measured results
International standard
Total solid content of total solids 61.53 61.5 min
Dry Rubber Content dry rubber content of 60.19 60 min
Non rubber solid non-rubber solids 1.49 2.0 max
Ammonia content (on total weight) ammonia 0.74 0.6 min
Ammonia content (on water PH.) Aqueous ammonia 1.92 3.0 max
PH of latex pH 10.58 11.0 max
KOH number potassium hydroxide content of 0.48 1.0 max
V. F. A. volatile fatty acid value 0.014 0.03max
De
Performance: Natural latex has good film forming properties, high wet gel strength, good mechanical properties, non-rubber component content of less mechanical stability (no less than 550S-600S), color white, foam stability.
Technical parameters: solids content: 61% ± 0.5
Latex various technical indicators, average 61.5% total solids, dry rubber content of 60.2%, with a total difference of 1.3% adhesive solids and ammonia content of 0.72%, 0.04% volatile fatty acid value and mechanical stability of the 650 seconds, milky white.
Storage: temperature below 20 ℃, indoor and outdoor storage in a more ventilated place; temperature above 20 ℃, should be stored in a cool room; not allowed to be stored outdoors and sun exposure can be directly affected by the place.
Shelf life: temperature below 20 ℃ for 180 days (it should be sealed); temperature above 20 ℃ for 60 days (it should be sealed). If the cover has been opened, should be used within 30 days, otherwise will produce changes in glial
Uses: widely used in latex foam, shoe factory to help pull molding, (factory fit) composite plant / fabric glue factory roll Tong, handbag, bag factory, folding side rivet factory, paper factory, anti-radiation products factory, the conductive coating glove products, handicraft factory to provide tensile viscoelastic (rubber) used for "glue" coconut palm coconut palm coconut basket mattress Arts adhesion (hair, brown, animal and synthetic fiber , artificial leather) adhesive, flocking, bonding leather / leather / cotton fabric / foam / EVA slice, mattresses, pillows, pillow, lumbar pillow, cushion, car headrest, foam shoes, sponge, balloon , condoms, gloves, impregnated products, fit, hair (brown) fibers, flocking, paper, non-woven, molded products, mold and so on.
Packing: iron drum net weight 205KGS GW 221KGS
L A T E X T E S T R E P O R T
Natural gum milk detection report
Subject: The quality test report of natural rubber latex 60% DRC HA
Title: High ammonia concentrated natural latex quality inspection report
Items
Project Test result
International standard measured results
International standard
Total solid content of total solids 61.53 61.5 min
Dry Rubber Content dry rubber content of 60.19 60 min
Non rubber solid non-rubber solids 1.49 2.0 max
Ammonia content (on total weight) ammonia 0.74 0.6 min
Ammonia content (on water PH.) Aqueous ammonia 1.92 3.0 max
PH of latex pH 10.58 11.0 max
KOH number potassium hydroxide content of 0.48 1.0 max
V. F. A. volatile fatty acid value 0.014 0.03max
Mechanical Stablity Time (S) mechanical stability of the rate (s) 860 650 min
Magnesium Content (on solids), PPM Mg 32.5 80 PPM
Color of latex emulsion color White White White White
All tests are performed according to the relevant ISO 2004 - 1979 (E) Specification
Tested by SGS International Inspecting Co., Ltd. Bangkok branch
Bangkok international inspection agencies by SGS Inspection Branch
Magnesium Content (on solids), PPM Mg 32.5 80 PPM
Color of latex emulsion color White White White White
All tests are performed according to the relevant ISO 2004 - 1979 (E) Specification
Tested by SGS International Inspecting Co., Ltd. Bangkok branch
Bangkok international inspection agencies by SGS Inspection Branch
