CELLSCALE MECHANOCULTURE T1 细胞拉力培养系统是指细胞在不同的组织工程支架条件下进行力学牵拉刺激培养，如小肠下粘膜硅胶膜肠系膜水凝胶静电纺丝壳聚糖丝素蛋白等等，对于组织工程研究具有重要的意义。原来由于受到技术条件的影响，对于不同组织工程支架材料的细胞力学研究的论文比较少。
口腔细胞力学 颞下颌关节滑膜细胞，人牙周膜细胞，口腔上皮细胞，口腔鳞癌KB细胞等
骨细胞力学：骨骼细胞，肌腱细胞，韧带细胞，软骨细胞和骨细胞，骨髓间充质干细胞，
软骨组织，椎间盘骨组织，肌腱组织，韧带组织等
肺呼吸肺细胞力学，肺上皮细胞，肺动脉内皮细胞，人肺微血管内皮细胞
眼科细胞力学视觉神经眼上皮细胞，眼小梁组织细胞，视网膜神经细胞
心血管/高血压：心肌细胞，血细胞，心血管平滑肌细胞，血管内皮细胞
生殖肾膀胱细胞，平滑肌细胞/尿路上皮及尿路上皮细胞，肾小管上皮细胞
消化肠上皮细胞，胃上皮细胞，胃血管内皮细胞
皮肤皮肤细胞，皮肤成纤维细胞
The MechanoCulture product group is used for culturing cells in a mechanically active environment. This product group contains configurations to support single or multiple parallel tests using a variety of flexible membranes and scaffolds. The on-board controllers enable PC-independent execution of user-defined motion protocols.
MechanoCulture B1
The MechanoCulture B1 imposes a biaxial stretch protocol on a 35mm circular sample that can be punched out of any user-supplied extensible sheet. The system supports both 3D scaffolds with embedded cells and 2D membranes with adhered cells. The chamber can be configured for 0.5-100mL of media.
The MechanoCulture B1
A deformable component is used to generate radial motions from a uni-directional input.
A secondary component is used to transfer 8 points of motion into 24. This feature distributes the load so that the puncture-pin attachment points will not tear through the specimen.
Specimens are cut using a hollow circular punch and thus can be made from any sheet of material provided that it is sufficiently flexible (silicone sheet, hydrogels, electrospun polymers).
