详细说明
EN 14766检测欧盟标准山地自行车
条款 测试项目
4.2 sharp edges
锐边
4.3 security and strength of safety-related fasteners
与安全有关的紧固件的可靠性和强度
4.5 protrusions
突出物
4.6.1 brake system
制动系统
4.6.2.1 brake lever position
闸把位置
4.6.2.2 brake lever grips dimensions
握闸尺寸
4.6.3 attachment of brake assemly and cable requirements
车闸部件的安装和钢绳的要求
4.6.4 brake-block and brake-pad assemblies-Security test
闸皮和闸盒组合件—强度试验
4.6.5 brake adjustment
车闸的调整
4.6.6 hand-operated brake-system-strength test
手闸制动系统—强度试验
4.6.7.5.1 braking performance-track test method
制动性能—道路试验
4.6.7.5.2 braking performance-machine test method
制动性能—机器试验
4.6.8 brakes-Heat-resistance test
车闸耐热试验
4.7.1 handlebar -dimensions
把横管—尺寸
4.7.2 handlebar grips and plugs
把横管把套和把盖
4.7.3 handlebar stem-insertion-depth mark or positive stop
把立管—插入深度标记或有效挡块
4.7.4 handlebar stem-extension to fork-stem-Clamping requirements
把接头横管延伸部对前叉立管—夹紧要求
4.7.5 streering stabbility
车把稳定性
4.7.6.1 handlebar-stem-lateral bending test
把立管—侧向弯曲试验
4.7.6.2 handlebar and stem assembly-lateral bending test
把横管和把立管组合件—侧向弯曲试验
4.7.6.3 handlebar-stem-forward bending test
把立管—向前弯曲试验
4.7.6.4 handlebar and handlebar-stem -torsional security test
把横管和把立管—扭矩安全试验
4.7.6.5 handlebar-stem to fork-stem-torsional security test
把立管对于前叉立管—扭矩安全试验
4.7.6.6 bar-end to handlebar-torsional security test
把端把对于把横管—扭矩安全试验
4.7.7 handlebar and stem assembly-faitigue test
把横管和把立管—疲劳试验
4.8.1 suspension-frames-special requirements
避震车架—特殊要求
4.8.2 frame and front-fork assembly-impact test(falling mass)
车架和前叉组合件—冲击试验（落重）
4.8.3 frame and front-fork assembly-impact test(falling frame)
车架和前叉组合件—冲击试验（车架落下）
4.8.4 frame-fatigue test with pedalling forces
车架—脚蹬疲劳试验
4.8.5 frame-faitgue test with a horizontal force
车架—水平力疲劳试验
4.8.6 frame-faitgue test with a vertical force
车架—垂直力疲劳试验
4.9.2. means of location of the axle and wheel retention
前轴和前轮的夹紧定位方式
4.9.3.1 suspension-forks-fail-safe requirements
避震前叉—出故障时的安全要求
4.9.3.2 suspension-forks-tyre-clearance test
避震前叉—轮胎间隙试验
4.9.3.3 suspension-forks-tensile test
避震前叉—拉力试验
4.9.4. front fork-static bending test
前叉—静弯曲试验
4.9.5 front fork-rearward impact test
前叉—向后冲击试验
4.9.6 front fork-bending fatigue test
前叉—弯曲疲劳试验
4.9.7.2 fork intended for use with hub-or disc-brakes-static brake-torque test
用于轮毂闸/盘闸的前叉—静态制动力矩试验
4.9.7.3 fork for hub/ disc-brakes-repeated brake-torque test
用于轮毂闸/盘闸的前叉—重复制动力矩试验
4.10.1 wheels and wheel/tyre assembly-rotational accuracy
车轮和车轮/轮胎组合件—转动精度
4.10.2 wheel/tyre assembly-clearance
车轮/轮胎组合件—间隙
4.10.3 wheels/tyre assembly-static strength test
车轮/轮胎组合件—静负荷试验
4.10.4 wheel retention
车轮的夹持
4.10.5 wheels-quick-release devices
车轮—快拆机构
4.11.1 tyre inflation pressure
轮胎充气压力
4.11.2 tyre and rim compatibility
轮胎和轮辋的配合性
4.11.3 rim-wear
轮辋的磨损
4.12 mudguards
泥板
4.13.1 pedal tread
脚蹬的脚踩面
4.13.2 pedal clearance
脚蹬间隙
4.13.3 pedal/pedal-spindle assembly-static strength test
脚蹬/脚蹬轴组合件—静负荷试验
4.13.4 pedal-spindle-impact test
脚蹬轴—冲击试验
4.13.5 pedal/pedal-spindle-dynamic durability test
脚蹬/脚蹬轴—动态耐久性试验
4.13.6 drive-system-static strength test
驱动系统—静负荷试验
4.13.7 crank assembly-fatigue test
曲柄组合件—疲劳试验
4.14.2 saddle and seat-pillar: limiting dimensions
鞍座和鞍管：限制尺寸
4.14.3 seat-pillar-insertion -depth mark or positive stop
鞍管—插入深度标记或有效挡块
4.14.4 saddle/seat pillar-security test
鞍座/鞍管—夹紧试验
4.14.5 saddle-static strength test
鞍座—静负荷试验
4.14.6 saddle seat pillar clamp-fatigue test
鞍座和鞍管夹紧装置—疲劳试验
4.14.7 seat-pillar-fatigue test
鞍管—疲劳试验
4.15 drive-chain(only tensile and pin strength:)
驱动链条（拉力和强度试验）
4.16 chainguard
链罩
4.17 spoke protector
辐条保护盘
4.18 lighting systems and reflectors
照明系统和反射器
4.19 warming device
鸣号装置
4.20 Road-test on a fully-assembly bicycle
装配完善的山地车的操纵和行驶
5 manufacturer's instructions
制造商说明书
marking
标记
