产品介绍：
本设备通过差偏式磁盘或电子测速速偏差器，在线调节收卷速度，实现与主机线速度的同步。主要零部件选用优质材料，采用进口加工中心一次加工完成，零部件质量优越，易损件使用寿命更长。
卷绕方式采用主动式收卷结构，卷绕成形紧密，不松散。
卷绕同步张力采用PLC编程调频计算方式，保持倒卷材料保持稳定张力收卷，平面交叉纹路清晰
卷绕机入料前段设计恒定线速度控制机构，保证材料进机稳定
Introduce:
This machine by magnetic disc, adjust the winder speed to be synchronized with the extruder. Main components are made of superior material and by imported CNC machine one step finished. The quality of these components is excellent and the working life is much longer.
The winding speed is above 280m/min.
主要技术参数（Main Technical Parameters）：
|
卷绕机卷绕速度 |
Take-up speed |
6-280m/min |
6-280m/min |
|
卷绕最大直径 |
Maximum take-up traverse |
400mm |
400mm |
|
电源 |
Power supply |
AC 380/220V 50Hz/60Hz |
AC 380/220V 50Hz/60Hz |
|
卷绕排列方式 |
Winding Arrangement mode |
PLC编程 |
PLC |
|
排线功率 |
Arrangement power |
25w步进电机(3.5-110MM/S） |
25w stepper motor (3.5-110MM/S） |
|
电机功率 |
Motor power |
180W/锭 |
180W/spindle |
|
电机转速 |
Motor speed |
2800r/min |
2800r/min |
|
连接电缆 |
Connecting cable |
4×1.5mm R.S.J.MP |
4×1.5mm R.S.J.MP |
|
缠绕筒管材质 |
Take-up bobbin material |
铁管、铝管、塑管等依所需选用 |
Iron, aluminium and plastic bobbin can be used according to requirement of customer. |
|
缠绕筒管尺寸 |
Take-up bobbin size |
内径×外径×长度 38mm×41mm×230/270mm |
Internal dia.×Major dia.×L 38mm×41mm×230/270mm |
|
往复行程 |
Traverse control |
203/270mm |
203/270mm |
|
单锭面板尺寸 |
Single spindle panel size |
W×L 390×308mm |
W×L 390×308mm |
|
其他型号，不详列于此; 其他尺寸可根据要求制作. Other models are not completely listed here; Other sizes can be made according to the requirements. 卷绕机卷绕速度可按产品成型要求调节恒定速度 The constant liner speed is adjustable according to product forming requirement 缠绕直径大于200mm可以在有限范围内定制 Take-up traverse>200mm can be custom-made in limited range 缠绕筒管尺寸可定制规格 Either internal diameter or length can be custom-made in limited range 往复行程可定制 Other travel can be custom-made in limited range |
|||
注：以上产品外形或技术参数如有变化，恕不另行通知。Note: All technical parameter are subject to change without notice.
