产品介绍：
高精密恒张力单锭卷绕机主要应用于纺织、化纤、制线、轻工、电子等行业领域的生产配套使用。适用于折叠丝、裂膜线、碳纤维、不锈钢纤维，也可应用于卷取圆丝、窄丝、发泡丝、植物纤维丝、软金属丝带及纸绳和纺纱丝线等。
卷取丝线密度范围：60-280tex；绳径范围：1-6mm（宽于6mm可在有限范围内定制）。
本设备通过差偏式磁盘或电子测速速偏差器，在线调节收卷速度，实现与主机线速度的同步。
主要零部件选用优质材料，采用进口加工中心一次加工完成，零部件质量优越，易损件使用寿命更长。
卷绕方式采用主动式收卷结构，卷绕成形紧密，不松散。具有速度高，成形好，张力自主恒定，能耗低等特点，优于收卷其他同类产品，收卷速度达到280m/min以上。
Introduce:
The high precision constant tension single spindle winding machine is mainly used for textile, chemical fiber,yarn making, light industry and electronic industry etc. This winding machine owns advantages of high speed, good bobbin formation, automatic constant tension, low loss etc, it’s superior to other products of the same type. It’s applied for taking up yarn with density range of 60-280 tex; width range of 1-6mm (width range > 6mm can be custom-made in limited range). It’s suitable for folding thread, split film yarn, carbon fiber, stainless steel fiber, as well as for round wire, spun, foamed filament, vegetable fiber yarn, soft metal silk ribbon, paper yarn, blended yarn etc.
This machine by magnetic disc, adjust the winder speed to be synchronized with the extruder. Main components are made of superior material and by imported CNC machine one step finished. The quality of these components is excellent and the working life is much longer.
The winding speed is above 280m/min.
主要技术参数（Main Technical Parameters）：
|
卷绕机卷绕速度 |
Take-up speed |
6-280m/min |
6-280m/min |
|
卷绕最大直径 |
Maximum take-up traverse |
200mm |
200mm |
|
电源 |
Power supply |
AC 380/220V 50Hz/60Hz |
AC 380/220V 50Hz/60Hz |
|
电机型号 |
Motor model |
A062312 |
A0262312 |
|
电机功率 |
Motor power |
180W/锭 |
180W/spindle |
|
电机转速 |
Motor speed |
2800r/min |
2800r/min |
|
连接电缆 |
Connecting cable |
4×1.5mm R.S.J.MP |
4×1.5mm R.S.J.MP |
|
缠绕筒管材质 |
Take-up bobbin material |
铁管、铝管、塑管等依所需选用 |
Iron, aluminium and plastic bobbin can be used according to requirement of customer. |
|
缠绕筒管尺寸 |
Take-up bobbin size |
内径×外径×长度 38mm×41mm×230/270mm |
Internal dia.×Major dia.×L 38mm×41mm×230/270mm |
|
往复行程 |
Traverse control |
203/270mm |
203/270mm |
|
单锭面板尺寸 |
Single spindle panel size |
W×L 390×308mm |
W×L 390×308mm |
|
其他型号，不详列于此; 其他尺寸可根据要求制作. Other models are not completely listed here; Other sizes can be made according to the requirements. 卷绕机卷绕速度可按产品成型要求调节恒定速度 The constant liner speed is adjustable according to product forming requirement 缠绕直径大于200mm可以在有限范围内定制 Take-up traverse>200mm can be custom-made in limited range 缠绕筒管尺寸可定制规格 Either internal diameter or length can be custom-made in limited range 往复行程可定制 Other travel can be custom-made in limited range |
|||
注：以上产品外形或技术参数如有变化，恕不另行通知。Note: All technical parameter are subject to change without notice.
