| 項目 / 機種 | S80 CY | S100 CY | |
| CAPACITY | |||
| Center Height | mm(in) | 1065 (41.92) | 1300 (51.18") |
| Swing Over Bed | mm(in) | Ø2000(78.74") | - |
| Swing Over Cross Slide | mm(in) | Ø1550(61.02") | Ø1950(76.77") |
| Distance Between Center | mm(in) | 2000(78.84")~12000(472.44") | 2000(78.84")~12000(472.44") over |
| HEADSTOCK | |||
| Spindle Nose | A2-15 (OPTA2-20.A2-28) | A2-15 (OPTA2-20.A2-28) | |
| Spindle Bore | mm(in) | Ø230(9.05") (OPT: 360(14.1"), 410(16.1),535(21") | |
| Spindle Motor | Kw(hp) | 37/45kw(50/60HP) (opt. 60/75kw(80/100HP) / 100kw (130HP) | |
| TURRET | |||
| Turret Type | Hydraulic / Servo | ||
| No of Tool Station | 12 or 4 | ||
| Tool Shank Cross Section | mm(in) | □ 40 (1.6") or □ 50 (2") | |
| TREL | |||
| Trel X axis | mm(in) | 1000(39.37") | 1200(47.24") |
| Trel Z axis | mm(in) | 2000(78.84")~12000(472.44") over | |
| C AXIS (OPT.) | |||
| Turret type | BARUFFALDI-TBMA320 | ||
| Tool station | 12×VDI 60 | ||
| Max. tapping tool | mm | M24 | |
| Y axis | |||
| Trel axis | mm | ± 110 | |
| TAILSTOCK | |||
| Quill trel | MT＃6 | ||
| COOLANT SYSTEM 3 bars(opt.15bars) | |||
| Tank capacity | liter | 350 | |
| Pump motor | hp | 0.25 | |
| COOL | |||
| Cool unit | FANUC Oi-TD (OPT FANUC 18i-TB) | ||
