MY-V-1S伞齿轮产品参数
1.该装置是直接安装在闸阀和截止阀上的手动装置。
2.该装置采用弧齿锥齿轮和平面推力轴承，有运转平稳，扭矩大，噪音小，效率高的优点。
3.在所有的结合部，采用了密封胶全密封处理，达到了防水，防油渗漏的效果，防护等级为IP65。
4.手轮和阀杆罩可根据用户需求定制。
1.It is easy opening & closing that the gear box are directly mounted on Gate & Globe valve under thrust loads.
2.The gear box enable efficiency to rise over 90%.which consists of suitable bearing.
3.Regarding gear,It makes the gear box relax from noise under optimum heat treatment & precise grinding.
4.It can oid from waterproof & oil leakage as sophisticated oil seal is used at the through part.Protection Grade Can be IP65.
5.Hand wheel & stem cover are optional index.
MY-V-1S伞齿轮技术参数 Technical Data Sheet
| ╲ SIZE ╲ MODEL ╲ |
Gear Ratio 速比 |
Max Stem Diameter 最大阀杆直径 |
Max Thrust Capacity 最大推力 |
Max Output Torque 最大输出扭矩 |
M.A. 机械效益 |
Weight 重量 |
||
| mm | KN | Kgf | N.m | Kgf.m | ±10% | Kg | ||
| SB-VS10 | 2.3:1 | 20 | 60 | 6122 | 220 | 22 | 2 | 12 |
| SB-VS20 | 2.35:1 | 22 | 90 | 9184 | 350 | 36 | 2 | 15 |
| SB-V0 | 3:1 | 32 | 135 | 13776 | 550 | 56 | 2.6 | 23 |
| SB-V1 | 3.6:1 | 38 | 180 | 18367 | 900 | 92 | 3 | 25 |
| SB-V2 | 4.2:1 | 48 | 250 | 25510 | 1500 | 153 | 3.6 | 40 |
| SB-V3 | 4.2:1 | 52 | 280 | 28571 | 2000 | 204 | 3.6 | 55 |
| SB-V35 | 5:1 | 70 | 370 | 37755 | 2800 | 286 | 4.3 | 95 |
| SB-V5 | 6.3:1 | 90 | 650 | 66327 | 4500 | 459 | 5 | 170 |
| SB-V6 | 7.1:1 | 110 | 880 | 89796 | 6800 | 694 | 6 | 235 |
| MY-V-1S伞齿轮尺寸表 DIMENSION | Unit:mm |
| ╲ DIN ╲ MODEL ╲ |
base PART 底座部分 | EXTERNAL PART 外形尺寸 | INPUT SHAFT PART 输入轴部分 |
HAND WHEEL 手轮 |
||||||||||||
| TYPE 类型 |
FLANGE SIZE 法兰号 |
ΦD1 | P.C.D | ΦD3 | H | H1 | H2 | H3 | L2 | L | ||||||
| D2 | N-H-DP | L1 | ΦPD | KEY | ΦM | |||||||||||
| SB-VS10 | A | F-10 | 70 | 102 | 4-M10-15 | 125 | 3 | 38 | 65 | 110 | 215 | 120 | 34 | 26 | 8X7 | 300 |
| SB-VS20 | F-12 | 85 | 125 | 4-M12-18 | 150 | 46 | 70 | 125 | 230 | 135 | ||||||
| SB-V0 | F-14 | 100 | 140 | 4-M16-24 | 175 | 4 | 55 | 70 | 128 | 260 | 160 | 28 | 400 | |||
| SB-V1 | F-14 | 130 | 165 | 4-M20-30 | 210 | 5 | 62 | 75 | 145 | 320 | 180 | 500 | ||||
| SB-V2 | B | (F-20) | 140 | 205 | 8-M16-24 | 250 | 5 | 75 | 90 | 160 | 340 | 200 | 40 | 32 | 10X8 | 500 |
| SB-V3 | F-25 | 200 | 254 | 8-M16-24 | 300 | 85 | 100 | 170 | 365 | 225 | 600 | |||||
| SB-V35 | F-30 | 230 | 298 | 8-M20-35 | 350 | 105 | 140 | 225 | 420 | 280 | 50 | 650 | ||||
| SB-V5 | F-35 | 260 | 356 | 8-M30-45 | 415 | 145 | 155 | 280 | 515 | 355 | 55 | 38 | 10X8 | 700 | ||
| SB-V6 | F-40 | 300 | 406 | 8-M36-54 | 475 | 8 | 165 | 210 | 335 | 565 | 365 | 50 | 2-16X10 | 800 | ||
BA-0型美标弧齿轮，采用螺旋齿传动，扭矩力大，输入力小，噪音低，减少了磨檫力，具有手感舒，开关轻松,结构合理.提高了产品使用寿命。本产品内部配置了阀门铜螺母，为各种阀门产品节省了阀门螺母及轴承，且安装方便，主要使用于各种闸阀、截止阀等类型阀门
